Skip to Content

Author Archives: sachin

  1. Pump Sealing | Mechanical Seal vs Packing

    Leave a Comment

    Seals are a simple method of preventing fluid from escaping a vessel. Equipment like centrifugal pumps rely on seals to contain large volumes of pressurized fluid. There are two types of seals: the traditional pump packing known as packing or gland seals and the more modern mechanical seal. Packing seals rely on a rope-like packing that wraps around the shaft of a pump to fill the voids and prevent fluid from escaping. Mechanical seals are often preferred when leakage is unacceptable, such as applications involving hazardous materials. Their durable construction can with

    stand more wear and tear than mechanical packing without leaking.

    We will explain how pump sealing works and describe the differences between pump packing versus mechanical seals to help you determine the best solution for your application.

    Pump Sealing Explained

    Pump mechanical seals consist of three sealing components: rotating, stationary, and secondary seals. The seals prevent leaks from the circumferential gap between the shaft and other pump components. The rotating and stationary seals are lapped flat to keep fluid and gas from escaping. The rotating primary sealing element, fastened to the shaft, seals against the primary stationary sealing element, normally fastened to the gland.

    Secondary seals between the mechanical seal components and the shaft may be static or dynamic. Normally O-rings or V-rings, they make contact with the primary sealing elements acting as the closing force and initiating sealing.

    The primary and secondary seals offer leak protection at four points. The stationary seal is the primary seal for the gasket and stationary member. The secondary seal is typically a sealing ring such as a wedge, O-ring, or V-ring and seals the gap between the shaft sleeve or shaft and rotation member. A gasket or O-ring offers secondary sealing between the gland plate and the stuffing box.

    The rotating and stationary primary seals are the most vital sealing points. The faces of the mechanical seals press together with the force of a spring. To make the mating surface as flat as possible, surfaces are lapped flat and machinists use high-precision light-band optical measurement to ensure accuracy.

    Choosing Between Pump Packing vs. Mechanical Seals

    Mechanical Packing

    Pump packing and mechanical seals each provide benefits depending on the application.
    Mechanical seals offer the following advantages:

    • Reliability & Reduced Downtime: Long-term reliability and less downtime deliver a better return on investment.
    • Protect Products From Leakage: Eliminates leaking common in packing. Leakage from packing is common compared to mechanical seals and can waste significant product.
    • Low Maintenance: A lower risk of leakage reduces the need for time-consuming cleanup and adjustment compared to the glands in pump packing.
    • Less Frequent Access to Stuffing Box: It is unnecessary to access the stuffing box for adjustment or replacement of the packing gland.
    • Reduce Sleeve Wear: Reliability of the seals eliminates frequent maintenance and removal of the sleeve that can result in costly sleeve replacement.

    Pump packing offers the following advantages:

    • Inexpensive: The initial cost of packing is lower than mechanical seals.
    • Quick Installation: There is no need to decouple the driveshaft when installing packing rings, as with mechanical seals.
    • Less Dependence on Equipment Condition: Mechanical seals often require excellent equipment conditions to be installed correctly.
    • Misalignment and Axial/Radial Movement: Packing can tolerate misalignment and axial or radial movements more readily than mechanical seals.
    • Flexible and Accommodating: Packing simplifies maintenance procedures and part inventory.

    Seals We Offer

    At MPRC Seals, we offer a range of sealing solutions. Our seals include:

    • Outside Seals: A seal mounted outside the seal chamber boundaries.
    • Bellows: A metal tube with an accordion function with little friction and no leaks.
    • Cartridge Seals: Combines seal components, gland, and shaft sleeve into a single cartridge. They facilitate normally easier installation with preset face loading and quicker removal from pump shafts.
    • Single: Two seal faces made from a hard and soft material for the rotating and stationary face.
    • Double Seals: Eliminates fluid and gas leakage to deliver the highest safety levels, normally set up with a flush.
    • Tandem Seals: Mounts an additional sealing chamber to the shaft seal to prevent evaporation and leakage.

    Rely on MPRC Seals

    At MPRC Seals, we have been delivering reliable seals since 1982. We find solutions to the most difficult sealing issues for customers in a range of industries. To learn more about our customer-focused sealing solutions, request a quote today.